Viessmann 5280 Multi-Protocol Schalt-Und Switch Decoder # New Boxed #

Description

Viessmann 5280 multi-protocol switching and points decoder
NEW in original packaging!
The decoder is a multi-protocol decoder for the DCC and Märklin Motorola format. It is designed as a turnout decoder for 4 turnouts with double coils and also controls 2 servos. It has 4 output pairs that can also be configured for special functions. Various light effects can be created in this way, such as flashing for construction site lighting or advertising. If configured accordingly, the decoder recognizes the position of points with end-of-travel switch-off at the point outputs and reports this position back via RailCom. Features: 4 pairs of point outputs (double coil), outputs can also be configured as individual outputs, positive voltage switched, power supply either from the track signal or via an external power supply for the load to be switched, different functionalities of the outputs: pulse, continuous, flashing output, dimming, signals , random control (also for the servo outputs). Switching current up to a maximum of 5 A per output, total decoder maximum 5 A. With E-socket for feeding in the switching current via a separate transformer. Maximum total current of the decoder adjustable. LEDs at the outputs signal the switching command, track input, programming on the programming track, programming on the main track (POM), address programming also via button, RailCom. The servo outputs can Positioning paths and speeds can be configured, total supply current for both servos: 300 mA continuously, 450 mA briefly. With screw terminals.
The buyer bears the shipping costs.
The decoder is a multi-protocol decoder for the DCC and Märklin Motorola format. It is designed as a turnout decoder for 4 turnouts with double coils and also controls 2 servos. It has 4 output pairs that can also be configured for special functions. Various light effects can be created in this way, such as flashing for construction site lighting or advertising. If configured accordingly, the decoder recognizes the position of points with end-of-travel switch-off at the point outputs and reports this position back via RailCom. Features: 4 pairs of point outputs (double coil), outputs can also be configured as individual outputs, positive voltage switched, power supply either from the track signal or via an external power supply for the load to be switched, different functionalities of the